|
|
![]() ![]() |
|
![]() ![]() ![]() ![]() |
|
Опции темы | Поиск в этой теме |
![]() ![]() |
![]() ![]() |
Модератор своих разделов
Регистрация: 03.07.2010 Последняя активность: 10.10.2022 08:53
Сообщений: 1652
Сказал(а) спасибо: 0
Поблагодарили: 2985 раз(а) в 1025 сообщениях
|
![]()
Shockli 4x18650 7.4V 4400mAh
![]() Official specifications:
![]() This is a four cell bicycle battery pack. ![]() ![]() The cells is packed in rubber and includes a pouch for mounting the pack on the bike. ![]() ![]() ![]() ![]() Inside the rubber the batteries are packed in two layers of shrink wrap. The cable do not have a real strain relief, but the shrink wrap helps keeping it in. ![]() The pack uses Chinese batteries, not really a surprise with a 4400mAh pack rating. ![]() ![]() The protection circuit looks like it is checking both cell pairs, but without balancing. ![]() Capacity is considerable better than rated. The over current protection can trip at 5A load (This is temperature depend). The pack was up to about 53° during my test (Measured in the pouch). ![]() ![]() ![]() ![]() The pack can easily drive a 10W load, but 30W is a bit much (25W would probably be fine). ![]() ![]() Conclusion The pack works fine, but has a fairly low capacity. Notes and links The battery was supplied by Shockli for review. How is the test done and how to read the charts How is a protected LiIon battery constructed More about button top and flat top batteries
__________________
My website with reviews of charges, batteries and other stuff: http://www.lygte-info.dk/ |
![]() |
![]() ![]() |