|
|
![]() ![]() |
|
![]() ![]() ![]() ![]() |
|
Опции темы | Поиск в этой теме |
![]() ![]() |
![]() ![]() |
Модератор своих разделов
Регистрация: 03.07.2010 Последняя активность: 10.10.2022 08:53
Сообщений: 1652
Сказал(а) спасибо: 0
Поблагодарили: 2985 раз(а) в 1025 сообщениях
|
![]()
AWT IMR18650 1600mAh (Yellow)
Flat top version (ft) ![]() This is a high current battery with fairly low capacity. Official specifications:
![]() The battery does nice up to 20A with acceptable tracking between the cells and nearly constant capacity, but it cannot do 30A. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Button top version (bt) ![]() ![]() The button top version has slightly higher resistance due to the button top. This is only significant well above 10A. ![]() ![]() ![]() ![]() ![]() ![]() These two cells do also track very nicely. ![]() ![]() ![]() ![]() ![]() ![]() Conclusion The battery is a acceptable high current cell, at least up to 20A, but the capacity cannot match the newer high current cells. Notes and links The batteries was supplied by AWT for a review. How is the test done and how to read the charts How is a protected LiIon battery constructed More about button top and flat top batteries Compare to 18650 and other batteries
__________________
My website with reviews of charges, batteries and other stuff: http://www.lygte-info.dk/ [Исправлено: HKJ, 15.12.2014 в 22:10] |
![]() |
![]() ![]() |
Поблагодарили: 1 раз |
Admin (15.12.2014)
|