|
|
|
3953 0 1 0 |
|
Опции темы | Поиск в этой теме |
14.08.2010, 07:23 | 1 |
Регистрация: 26.06.2010 Последняя активность: 26.08.2011 11:52 Адрес: China
Сообщений: 207
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
|
ITP H01
iTP Light H01 Cree 7909-XP-E Q5 3-Mode 80-Lumen LED Headlamp Operation
Battery installation: - Remove the light tail. - Insert the battery with the negative end toward the tail. Operation: - Insert the battery and tighten the tail - Tighten the head clockwise to turn on the headlamp. - When the light is on, loosening (counter-clockwise) and tightening (clockwise) the head within 1 second will change the mode between low, medium and high level. - After choosing a specific mode, the headlamp will memorize that level and will default to the level when turned on. - Loosen the head to turn off the headlamp. iTP Light H01 Cree 7909-XP-E Q5 3-Mode 80-Lumen LED Headlamp Specifications Brand: iTP Light Mode: H01 LED Type: Cree XP-E Q5 Function: Low-Med-High Finish: HA Type Ⅲ Reflector: Orange Peel Lens:Anti-shattering ultra clear lens, anti-scratching and anti-slip Water and Dust Resistant to IP68 Switch: Head Twisty Switch Mil-spec: MIL-STD-810F Battery: 1 x AAA, 1 x Rechargeable NiMh AAA, or 1 x 10440 (due to the small body size, 10440 batteries are not recommended since it may cause the light becoming hot very quickly). Batteries are not included. Three output levels: Low 1.5 lumens (50 hours) -> Medium 18 lumens (4 hours) ->-High 80 lumens (55 minutes) Standard Accessories: 1 x Clip, 2 x O-rings, 1 x Manual Size: L 52.5mm (2.07'') x D 16.2mm (0.64'') x W 36.2mm (1.43'') , Net Weight: 22.8g (Excluding Battery and belt), Weight (including the packing): 50.8g |