|
|
|
6337 0 1 0 |
|
Опции темы | Поиск в этой теме |
01.07.2010, 01:08 | 1 |
Новичок
Регистрация: 30.06.2010 Последняя активность: 29.05.2013 21:02 Адрес: Georgia, U.S.A.
Сообщений: 45
Сказал(а) спасибо: 0
Поблагодарили: 15 раз(а) в 7 сообщениях
|
Quark Turbo XP-E R2 Mod
This is a pretty basic mod really, but I thought I'd share it with anyone who's interested. I took my Quark 123-2 Turbo and swapped the XP-G R5 emitter for an XP-E R2 emitter. My reasoning behind this was to increase the throw, since that's what the Quark Turbo's are mostly for anyway right. I haven't had the time to take any outdoor beam shots, but if I get time I'll try to. I did take an indoor beam shot comparing my 123-2 XP-E R2 Turbo with my AA-2 XP-G R5 Turbo. Anyway, enough talking and on with the pictures:
Head separated: Different angle of head separated: Head separated, plastic piece that centers the emitter removed: You've probably seen this before, but I thought I'd throw it in: The other half of the head: Reflector and glass: XP-E R2 emitter: XP-G R5 emitter removed: Everything put back together: The lights were about 1ft from the wall in this picture. The XP-E is on the left and the XP-G is on the right: 23 ft. from light to tree. I haven't had time to take shots of the two for comparison yet, but I hope to. [Исправлено: ti-force, 01.07.2010 в 05:41] |