Светодиодные фонари и световые приборы. Всё о светотехнике.
Вернуться   Форум FONAREVKA.RU Обзоры фонарей Flashlight Reviews
Расширенный поиск
Забыли пароль? Регистрация

  • О нашем проекте
  • Светотехника и световые приборы
  • Правила форума
Проект FONAREVKA.RU специализируется на предоставлении всей необходимой информации по светотехнике:

— светодиодные фонари;
— различные источники питания;
— разнообразные зарядные устройства;
— освещение помещений и наружное освещение;
— световые приборы для личного, пассажирского и грузового транспорта;
— специальные световые приборы для медицины, для растений, для аквариумов, для террариумов, а также аварийно-сигнальные световые приборы;
— альтернативные источники света;
— лазеры и лазерная техника.

Если у вас есть вопросы по выбору фонарей, аккумуляторов и зарядных устройств ознакомьтесь с FAQ от наших экспертов:

F.A.Q. по выбору фонарей различных типов;
F.A.Q. по выбору аккумуляторов;
F.A.Q. по выбору зарядных устройств.
Ответ  Создать новую тему
Просмотров в теме 8795   Ответов в теме 14   Подписчиков на тему 4   Добавили в закладки 1
Опции темы Поиск в этой теме
Старый 18.12.2015, 14:10 Автор темы   1
Увлеченный
 
Аватар для candle lamp
 
Регистрация: 01.08.2011
Последняя активность: 09.06.2017 16:17
Адрес: South Korea
Сообщений: 132
Сказал(а) спасибо: 4
Поблагодарили: 401 раз(а) в 86 сообщениях

Rolleye11 Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review









Lumintop has released the Tool AAA Copper version, compatible with AAA sized Ni-MH, Alkaline and Lithium battery. The packaging is special. I found the light in vacuum-packed, cute plastic case with two o-rings and keychain. There is a small thin pad for protecting the body against scratch due to the pocket clip. As expected, the main reason for the light in vacuum-packed is to prevent oxidation of the body surface. This is almost the final production pack.
.
.
Manufacturer Specifications from user manual :
• Utilizes High CRI Nichia 219 LED or CREE XP-G2 (R5) LED with 50,000-hour lifetime
• Output mode/Runtime :
- CREE-Type :
High : 110 lumens / 30 Minutes, Mid : 32 lumens / 10 hours, Low : 5 Lumens / 60 hours
- NICHIA-Type :
High : 80 lumens / 30 Minutes, Mid : 18 lumens / 10 hours, Low : 3 Lumens / 60 hours
• Modes : Mid-Low-High ; Two ways to change modes: press the clicky switch or tighten/loose the head
• Runs on : 1 x AAA (NOT included) (10440 Not Supported)
• Dimensions : Length : 3.2" (81.5mm) ; Head Diameter : 0.57" (14.5mm) ; Body Diameter : 0.57"(14.5mm) ; Weight : 1.06oz(30g) (excluding battery)
• Max Beam Intensity and Distance
- CREE-Type : 553cd, 47 meters
- NICHIA-Type : 304cd, 32 meters
• High-efficiency digitally regulated circuit to maintain a constant brightness as battery life diminishes
• Solid billet ultra conductive pure copper construction with polish finish, and packed in vacuum package preserve polished finish
• Glow in the Dark front O-ring around reflector
• Precision micro-textured reflector creates smooth, optimized beam
• Double-side AR coated, tempered window resists impact and thermal shock, maximizes light transmission (99% light transmittance)
• Reverse polarity protection to protect from improper battery installation
• Multi-Function, clicky switch provides one-handed operation and easy access to all functions
• High quality detachable stainless steel reversible clip makes it durable and keeps a firm grip on your pocket or hat
• Impact resistance to 1.5 meters and waterproof in accordance with IPX-8 (submersible to 2 meters)
• Market applications include, but are not limited to everyday carry, keychain, gift, emergency, security, hardware/tool and many other uses
• Operation : Click the tail switch to turn on/off; when the light is on, press the switch to select brightness (Mid-Low-High) ; or tighten/loose the head to change modes


.
.










The whole body is pure copper with polishing finish and no flaws on my sample. The head was nicely engraved with manufacturer and model name. The knurling is present over the head, body tube and tailcap. The light has a tail switch. Fit and finish look good.
.
.


The light has 3 parts. The pocket clip works as a good anti-roll device as well.
.
.


The head has a clean looking cylindrical design with a knurling band. The light has no reverse polarity protection function to protect from incorrect battery installation (i.e., you should be careful when inserting battery into the body tube). There is a GITD green o-ring present in the head, along with a orange peel reflector. You will see the nicely engraved model name on the head.
.
.




The light uses AR coating lens where the purple hue is reflected on it.
The light comes with a textured reflector (OP) and uses a Nichia 219B emitter. Centering of the emitters was pretty good on my sample. Note that you can choose Cree XP-G2 R5 version as well.
.
.




The pocket clip looks sturdy and hold onto the light very securely. It is reversible, allowing both head-up or head-down. Note that the head and tailcap are reversible on the battery tube, so you can switch the direction of the clip by simply exchanging the head and tailcap. There is no risk the light might catch on something and be pulled off.
.
.


The battery tube is mostly covered in typical diamond shaped knurling. With the pocket clip attached, overall grip is acceptable. The wall thickness of the body is 1.1mm, which is not so thick for the class.
.
.


The screw threads are triangular-cut of good quality. As supplied, threads are not lubricated. But, screw threads action is smooth with no cross-threading or squeaking in my sample.
.
.


The light uses a reverse clicky. The silicon switch cap protrudes out the tail end. The switch has stiff tension with average travel. The light has two attachment points for lanyard or split-ring. which prevents tailstanding.
.
.
User Interface

Turn the light on-off by the reverse clicky switch (i.e., click and release to turn on-off). You can advance through modes by a partial soft-press of the switch (or rapid off-on). Alternatively, you can loosen-tighten the head to move through modes when switched on at the tailcap.

Mode sequence is Med. -> Low -> High, in repeating sequence. The light always defaults to Med. if it is off for more than three second or four. There is no mode memory. You can lock the light by loosening the head slightly.

There are no strobe modes.
.
.




From left to right, Panasonic Eneloop AAA (750mAh), Fenix E99 Ti (XP-E2), Ultratac K18 (XP-G2 S2), Skillhunt Ramble-I (XP-E R2). Lumintop Tool AAA Copper (Nichia 219B).
.
.
Measured Dimensions

.
.


The Tool AAA Copper is not a very small and lightweight light, as it has a tail switch with pure copper body. But it's good size to hold and use. You can use it as an EDC light. Overall build quality is very high.
.
.
PWM


The light shows no sign of PWM at all output levels. I notice there is no buzzing sound at any levels.
.
.
Runtime


The runtime to fall to 10% of its initial output from 30 seconds after the point the light is first turned on (i.e., based on ANSI FL-1) for High is as follows :

The light maintains perfectly flat regulation for an extended period, followed by a dropping off. As expected, Eneloop AAA (900mAh) gives you the longest runtime. Note that 10440 li-ion is not officially supported (i.e, working voltage is 0.9~1.5V).
Output-runtime efficiency seems good, as expect for a current-controlled light.
.
.
Beamshot

1. White door beamshot (about 50cm from the white door) on max. output on 1xPanasonic Eneloop AAA (750mAh)
- ISO125, F/8.0, 1/25sec, Auto white balance


.
.
- ISO125, F/8.0, 1/100sec, Auto white balance


.
.
- ISO125, F/8.0, 1/800sec, Auto white balance


.
.
- ISO125, F/8.0, 1/2000sec, Auto white balance'



The light shows good beam quality. The beam has a neutral white tint.
.
.
2. 3.5m Indoor Beamshot on max. output on 1xPanasonic Eneloop AAA (750mAh)
- ISO125, F/2.8, 1/10sec, Auto white balance

.
.


The above pictures make it look like all lights are not brighter than they actually are.
.
.
3. 7.0m Indoor Beamshot on max. output on 1xPanasonic Eneloop AAA (750mAh)
- ISO125, F/2.8, 1/10sec, Auto white balance

.
.


The above pictures make it look like all lights are not brighter than they actually are.
.
.
Overall Impressions

• Build quality is very high
• Heavier than this class of light due to the copper body
• Oxidation will slowly change the body color, but still will be classy
• The light can't tailstand
• Anti-roll indentations on the body
• Physical lockout function (i.e.,head)
• No reverse polarity protection function
• 10440 Li-ion is not supported
• No mode memory (always turns on in Med.)
• True Moonlight mode is not available
• No flickering due to PWM and no buzzing sound at any outputs (i.e., current-controlled circuit)
• Output-runtime efficiency seems good
• Overall beam tint is nice neutral white

Lumintop Tool AAA Copper provided by Lumintop for review.

[Исправлено: candle lamp, 21.12.2015 в 14:52] Причина: Manufacturer's website link
candle lamp вне форума   Ответить с цитированием Вверх
Поблагодарили: 6 раз(а)
Kelevratony (30.12.2016), Linx (18.12.2015), Lumin (19.05.2016), m72 (19.12.2015), rpdoctor (24.09.2016), Svetogor (18.12.2015)
Старый 18.12.2015, 14:14   2
Exploder
смотритель маяка
 
Аватар для Exploder
 
Регистрация: 11.03.2013
Последняя активность: 15.11.2023 09:17
Адрес: Калининец
Сообщений: 2255
Сказал(а) спасибо: 257
Поблагодарили: 524 раз(а) в 307 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Какие симпотичные картинки....
Exploder вне форума   Ответить с цитированием Вверх
Старый 19.12.2015, 09:00   3
PASHA
вечный n00b
 
Аватар для PASHA
 
Регистрация: 29.11.2012
Последняя активность: 14.08.2023 21:24
Адрес: 63RU TLT My Pleasantville
Сообщений: 7691
Записей в дневнике: 2
Сказал(а) спасибо: 5257
Поблагодарили: 1338 раз(а) в 918 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

How much is the fish?
__________________
Было , Есть, Convoy S3 T6-4C, Olight i3s violet, Surefire e1b Silver, Surefire eb1, Trustfire mini-03+TIR 60, Maratac AAA Copper
PASHA вне форума   Ответить с цитированием Вверх
Старый 19.12.2015, 13:13 Автор темы   4
candle lamp
Увлеченный
 
Аватар для candle lamp
 
Регистрация: 01.08.2011
Последняя активность: 09.06.2017 16:17
Адрес: South Korea
Сообщений: 132
Сказал(а) спасибо: 4
Поблагодарили: 401 раз(а) в 86 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Цитата:
Посмотреть сообщение Сообщение от PASHA :
How much is the fish?
There're so many fishes. What kind of fish do you like?
candle lamp вне форума   Ответить с цитированием Вверх
Старый 19.12.2015, 13:35   5
PASHA
вечный n00b
 
Аватар для PASHA
 
Регистрация: 29.11.2012
Последняя активность: 14.08.2023 21:24
Адрес: 63RU TLT My Pleasantville
Сообщений: 7691
Записей в дневнике: 2
Сказал(а) спасибо: 5257
Поблагодарили: 1338 раз(а) в 918 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Цитата:
Посмотреть сообщение Сообщение от candle lamp :
There're so many fishes. What kind of fish do you like?
I mean this copper one )))
PASHA вне форума   Ответить с цитированием Вверх
Старый 19.12.2015, 15:48 Автор темы   6
candle lamp
Увлеченный
 
Аватар для candle lamp
 
Регистрация: 01.08.2011
Последняя активность: 09.06.2017 16:17
Адрес: South Korea
Сообщений: 132
Сказал(а) спасибо: 4
Поблагодарили: 401 раз(а) в 86 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Цитата:
Посмотреть сообщение Сообщение от PASHA :
I mean this copper one )))
It's USD 59 at Gearbest. But I don't know if this is the lowest price.
candle lamp вне форума   Ответить с цитированием Вверх
Старый 19.12.2015, 22:03   7
PASHA
вечный n00b
 
Аватар для PASHA
 
Регистрация: 29.11.2012
Последняя активность: 14.08.2023 21:24
Адрес: 63RU TLT My Pleasantville
Сообщений: 7691
Записей в дневнике: 2
Сказал(а) спасибо: 5257
Поблагодарили: 1338 раз(а) в 918 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Yeah, it's not rather cheap. ))
PASHA вне форума   Ответить с цитированием Вверх
Старый 19.12.2015, 22:29   8
zazara
Ветеран Фонарёвки
 
Регистрация: 04.06.2013
Последняя активность: Сегодня 12:36
Адрес: СПб
Сообщений: 5081
Сказал(а) спасибо: 461
Поблагодарили: 4506 раз(а) в 1579 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Фонарь для невынимания из запаянного пакетика, т.к. тут же окислится и превратится в УГ без покрытия. А за такую цену нужно его поставлять в герметичном прозрачном ящичке сразу.

[Исправлено: zazara, 19.12.2015 в 22:31]
zazara вне форума   Ответить с цитированием Вверх
Старый 20.12.2015, 10:16   9
PASHA
вечный n00b
 
Аватар для PASHA
 
Регистрация: 29.11.2012
Последняя активность: 14.08.2023 21:24
Адрес: 63RU TLT My Pleasantville
Сообщений: 7691
Записей в дневнике: 2
Сказал(а) спасибо: 5257
Поблагодарили: 1338 раз(а) в 918 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Цитата:
Посмотреть сообщение Сообщение от zazara :
герметичном прозрачном..
гробике ))
PASHA вне форума   Ответить с цитированием Вверх
Старый 19.05.2016, 10:00   10
Lumin
Заблокирован
 
Регистрация: 23.09.2013
Последняя активность: 19.07.2019 01:54
Сообщений: 399
Сказал(а) спасибо: 125
Поблагодарили: 10 раз(а) в 8 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Однааааааако! Даже не знал, что начали хайкри наключники делать толком. Дешевле не нашелся нигде?
Lumin вне форума   Ответить с цитированием Вверх
Старый 22.09.2016, 23:55   11
zazara
Ветеран Фонарёвки
 
Регистрация: 04.06.2013
Последняя активность: Сегодня 12:36
Адрес: СПб
Сообщений: 5081
Сказал(а) спасибо: 461
Поблагодарили: 4506 раз(а) в 1579 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Нажмите на изображение для увеличения
Название: 2in1m.jpg
Просмотров: 695
Размер:	551.1 Кб
ID:	174404
zazara вне форума   Ответить с цитированием Вверх
Старый 24.09.2016, 19:46   12
PASHA
вечный n00b
 
Аватар для PASHA
 
Регистрация: 29.11.2012
Последняя активность: 14.08.2023 21:24
Адрес: 63RU TLT My Pleasantville
Сообщений: 7691
Записей в дневнике: 2
Сказал(а) спасибо: 5257
Поблагодарили: 1338 раз(а) в 918 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

вот потемнее больше нравится, жду когда мой благородно потемнеет до цвета виски )))
PASHA вне форума   Ответить с цитированием Вверх
Старый 24.09.2016, 23:07   13
zazara
Ветеран Фонарёвки
 
Регистрация: 04.06.2013
Последняя активность: Сегодня 12:36
Адрес: СПб
Сообщений: 5081
Сказал(а) спасибо: 461
Поблагодарили: 4506 раз(а) в 1579 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Цитата:
Посмотреть сообщение Сообщение от PASHA :
благородно
Не дождался, от пальцев чернеет пятнами. Поэтому принудительно.
zazara вне форума   Ответить с цитированием Вверх
Старый 25.09.2016, 08:26   14
PASHA
вечный n00b
 
Аватар для PASHA
 
Регистрация: 29.11.2012
Последняя активность: 14.08.2023 21:24
Адрес: 63RU TLT My Pleasantville
Сообщений: 7691
Записей в дневнике: 2
Сказал(а) спасибо: 5257
Поблагодарили: 1338 раз(а) в 918 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

а чем принудительно? если не секрет )))
PASHA вне форума   Ответить с цитированием Вверх
Старый 25.09.2016, 11:40   15
zazara
Ветеран Фонарёвки
 
Регистрация: 04.06.2013
Последняя активность: Сегодня 12:36
Адрес: СПб
Сообщений: 5081
Сказал(а) спасибо: 461
Поблагодарили: 4506 раз(а) в 1579 сообщениях

По умолчанию Re: Lumintop Tool AAA Copper 'Shipping version' (Nichia 219B, 1xAAA) Review

Цитата:
Посмотреть сообщение Сообщение от PASHA :
принудительно
В парах аммиака. Литровая банка, на дне бумажную салфетку и крышку от бутылки. На крышку фонарь вертикально. На бумагу пару миллилитров 10% раствора нашатыря из аптеки. Сверху крышка. На фото выдержка час при 25 градусах. Можно было и поменьше. Эффект заметен с 10 минут. Сначала лучше помыть с простым мылом, вытереть и досушить. Если уже в пятнах - они будут отличаться.
zazara вне форума   Ответить с цитированием Вверх
Поблагодарили: 3 раз(а)
combat_rabbit (01.10.2016), Niko0O (02.10.2016), PASHA (25.09.2016)
Ответ  Создать новую тему
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск





Copyright ©2007 - 2024, FONAREVKA.RU

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd. Перевод: zCarot

Правила форума | Отказ от ответственности

Время генерации страницы 0.16558 секунды с 19 запросами