Светодиодные фонари и световые приборы. Всё о светотехнике.
Вернуться   Форум FONAREVKA.RU Источники питания и зарядные устройства Batteries and Chargers. Reviews and tests. Battery chargers. Reviews and tests.
Расширенный поиск
Забыли пароль? Регистрация

  • О нашем проекте
  • Светотехника и световые приборы
  • Правила форума
Проект FONAREVKA.RU специализируется на предоставлении всей необходимой информации по светотехнике:

— светодиодные фонари;
— различные источники питания;
— разнообразные зарядные устройства;
— освещение помещений и наружное освещение;
— световые приборы для личного, пассажирского и грузового транспорта;
— специальные световые приборы для медицины, для растений, для аквариумов, для террариумов, а также аварийно-сигнальные световые приборы;
— альтернативные источники света;
— лазеры и лазерная техника.

Если у вас есть вопросы по выбору фонарей, аккумуляторов и зарядных устройств ознакомьтесь с FAQ от наших экспертов:

F.A.Q. по выбору фонарей различных типов;
F.A.Q. по выбору аккумуляторов;
F.A.Q. по выбору зарядных устройств.
Ответ  Создать новую тему
Просмотров в теме 3694   Ответов в теме 1   Подписчиков на тему 2   Добавили в закладки 0
Опции темы Поиск в этой теме
Старый 15.08.2019, 18:40 Автор темы   1
Модератор своих разделов
 
Аватар для HKJ
 
Регистрация: 03.07.2010
Последняя активность: 10.10.2022 08:53
Адрес: Copenhagen, Denmark
Сообщений: 1652
Сказал(а) спасибо: 0
Поблагодарили: 2981 раз(а) в 1024 сообщениях

По умолчанию Test/review of Charger Basen BO-4

Charger Basen BO-4





This is a fairly simple quad cell LiIon charger from Basen.



It arrived in a cardboard box with a lot of specification on it.



The box contained the charger, a usb cable and a instruction sheet.



The charger is usb powered with a micro usb input.



There is only one button and a couple of leds. The button will change selected current, default is 0.5A.




During power on all the leds will shortly turn on. During charge the blue leds are animated and only one green led is on.



The specifications are on the bottom of the charger, but rather hard to read.



The charger uses the classic slider construction and will handle batteries from 28mm to 70.4mm, this will give problem with the longest protected cells.






The charger can handle up to 70mm long batteries,



Measurements
  • Power consumption from usb when idle with no batteries is 13mA
  • Below 0.5V the charger will not detect a battery
  • Between 0.5 and 2.8V the charger will charge with low current
  • Above 2.8V the charger will use full current.
  • Will restart charging if voltage drops below 4.15V, but it may need some time to react.
  • Will restart charging if battery is inserted or power cycled.



Nice CC/CV charge curve with a 70mA termination current



Oops, the charger voltage is way to high on this slot.




The two last slots looks fine enough.




These two cells looks fine.



Even the old cell is charged fine.




No problem with 0.5A charging current.



This old and worn out cells drops significantly in voltage when charging terminates and the charger restart.



I have selected 2A charging current and with one cell in the charger the current is 2A.



This high current cells looks about the same during charging.



With two cells it will only be 1A



And with four cells 0.5A



Adding 0.5ohm resistance in series with the power supply to simulate a long cable or weak supply shows that the charger will reduce usb and charge current, but the charging works fine.


M1: 31.2°C, M2: 32.5°C, M3: 31.9°C, M4: 30.4°C, M5: 33.9°C, M6: 39.6°C, HS1: 44.5°C


HS1: 47.4°C



Being a fairly simple charger I could draw the current profile.



The charger is very fast to start, it needs less than a second.



It is possible to change current at any time.



Conclusion

I like the simple user interface, it is very easy to select current and see how much the batteries are charged. The CC/CV charge curve is good and termination is at a fairly low current

But slot #2 is problematic with the high charge voltage and for this reason I will only give the charge an acceptable rating.



Notes

Here is an explanation on how I did the above charge curves: How do I test a charger
__________________
My website with reviews of charges, batteries and other stuff: http://www.lygte-info.dk/
HKJ вне форума   Ответить с цитированием Вверх
Поблагодарили: 1 раз
РШ (15.08.2019)
Старый 22.12.2019, 05:06   2
Ramonajef
Заблокирован
 
Регистрация: 26.08.2019
Последняя активность: 29.11.2021 02:40
Адрес: Barbados
Сообщений: 1
Сказал(а) спасибо: 0
Поблагодарили: 0 раз(а) в 0 сообщениях

По умолчанию Test/review of Charger Basen BO 4

I dont know. It does not tell its rated amps. I am currently using a 20 amp charger I got at TSC on clearance last fall to charge my forklift batteries when the sun has not been out in days. I run the HF generator for 6 hours on a gallon of gas to pump 120 amps into the battery bank as needed.

But I have always looked for a higher current charger for a faster top off
Ramonajef вне форума   Ответить с цитированием Вверх
Ответ  Создать новую тему
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск





Copyright ©2007 - 2024, FONAREVKA.RU

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd. Перевод: zCarot

Правила форума | Отказ от ответственности

Время генерации страницы 0.11573 секунды с 18 запросами