Светодиодные фонари и световые приборы. Всё о светотехнике.
Вернуться   Форум FONAREVKA.RU Обзоры фонарей Flashlight Reviews Bike Lights. Flashlight Reviews.
Расширенный поиск
Забыли пароль? Регистрация

  • О нашем проекте
  • Светотехника и световые приборы
  • Правила форума
Проект FONAREVKA.RU специализируется на предоставлении всей необходимой информации по светотехнике:

— светодиодные фонари;
— различные источники питания;
— разнообразные зарядные устройства;
— освещение помещений и наружное освещение;
— световые приборы для личного, пассажирского и грузового транспорта;
— специальные световые приборы для медицины, для растений, для аквариумов, для террариумов, а также аварийно-сигнальные световые приборы;
— альтернативные источники света;
— лазеры и лазерная техника.

Если у вас есть вопросы по выбору фонарей, аккумуляторов и зарядных устройств ознакомьтесь с FAQ от наших экспертов:

F.A.Q. по выбору фонарей различных типов;
F.A.Q. по выбору аккумуляторов;
F.A.Q. по выбору зарядных устройств.
Ответ  Создать новую тему
Просмотров в теме 11008   Ответов в теме 0   Подписчиков на тему 0   Добавили в закладки 0
Опции темы Поиск в этой теме
Старый 23.11.2010, 02:23 Автор темы   1
Увлеченный
 
Аватар для Dominik
 
Регистрация: 25.06.2010
Последняя активность: 24.06.2015 07:00
Адрес: Polska - Wroclaw
Сообщений: 57
Сказал(а) спасибо: 0
Поблагодарили: 24 раз(а) в 11 сообщениях

По умолчанию CATEYE HL-EL500 (Best, can it be better ?)


Many of bike nightriders know this lamp well... bright, weather-proof, all-night...

It is to expensive, to big and gives to small light spot – but you simply can’t find any better bike-lamp in this price

Let’s go to business… You can’t dismount EL500 as easy as others cateye’s based on 5 mm leds - collimator is glued with led-base and it won’t take off easily. Most of people will stop here - destroying 50 bucks lamp isn’t the best idea - but by using long kitchen knife (not the spike - blade) and some carefully leverage you can separate collimator from base (if you have some luck the glue will split not the case ).

And What you can find here :
Luxeon emitter on some alu plate (heatsink)



High advanced driver - 3 resistors… (you were expecting something more ?).


Ok let’s test it – (4 AA bateries used few times).
idle voltage : 5,6v
load voltage: 3,48v
work current : 230 mA
Not too much but emitter in this lamp is pretty well thermal isolated from environment and you can’t give it more current.

HL-EL500 have very good optics so I used Cree XLamp 7090 1W (if Lux was to spotty this should be ideal) and at the same current it will give twice much of light.

Star wont fit at the first time, but using file do the job. Then some thermal glue, wires and you can put it back together...



Before

After

Distance 2,5m, ISO200, time 1/8s, F 2.8, white ballance manual - fluorescent light.

Spot is bigger but brightness is a bit lower, in addition there is 5 feet beam of usable light. I think that effect is worth 7 bucks and 2 hours of time : but it isn't overwhelming maybe with K2.
Dominik вне форума   Ответить с цитированием Вверх
Ответ  Создать новую тему
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск





Copyright ©2007 - 2024, FONAREVKA.RU

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd. Перевод: zCarot

Правила форума | Отказ от ответственности

Время генерации страницы 0.07072 секунды с 16 запросами