Светодиодные фонари и световые приборы. Всё о светотехнике.
Вернуться   Форум FONAREVKA.RU Лаборатория Измерительные приборы
Расширенный поиск
Забыли пароль? Регистрация

  • О нашем проекте
  • Светотехника и световые приборы
  • Правила форума
Проект FONAREVKA.RU специализируется на предоставлении всей необходимой информации по светотехнике:

— светодиодные фонари;
— различные источники питания;
— разнообразные зарядные устройства;
— освещение помещений и наружное освещение;
— световые приборы для личного, пассажирского и грузового транспорта;
— специальные световые приборы для медицины, для растений, для аквариумов, для террариумов, а также аварийно-сигнальные световые приборы;
— альтернативные источники света;
— лазеры и лазерная техника.

Если у вас есть вопросы по выбору фонарей, аккумуляторов и зарядных устройств ознакомьтесь с FAQ от наших экспертов:

F.A.Q. по выбору фонарей различных типов;
F.A.Q. по выбору аккумуляторов;
F.A.Q. по выбору зарядных устройств.
Ответ  Создать новую тему
Просмотров в теме 5089   Ответов в теме 7   Подписчиков на тему 2   Добавили в закладки 0
Опции темы Поиск в этой теме
Старый 26.03.2012, 20:16 Автор темы   1
Увлеченный
 
Аватар для turboBB
 
Регистрация: 25.06.2010
Последняя активность: 23.08.2013 16:00
Адрес: NJ, USA
Сообщений: 110
Сказал(а) спасибо: 0
Поблагодарили: 104 раз(а) в 43 сообщениях

По умолчанию Lumens measuring contraption (feedback please!)

Wanted to throw this idea out to the experts, so please humor me if you will...

Two things lacking from my reviews have been:
- PWM readings (building audio cable connected to solar cell and will use a PC soundcard oscilloscope program)
- Lumens measurement. While I can do a ceiling bounce, there are usually too many factors introduced (beam shape/intensity chief amongst them)

For the latter, I've been meaning to build an IS but don't like the idea that there would not be a stable platform/holder for the light while I'm taking measurements (especially for runtime logging). Also, based upon what I've read, I felt tweaking the baffle has been one of the trickiest parts to calibrating it properly. So I came up with this idea based on the following criteria:
- must accomodate bezel head up to 4" in diam
- allow consistent repeatable measurements
- provide stable platform for light to rest on while doing runtime / logging and light must be exposed to allow fan to cool it
- not be affected by ambient lighting while logging is in progress
- no fiddling w/a baffle
- simple to build w/easily sourced parts
- reasonably budget friendly
- allow light sensor to be easily removed for other measurements
- easy for others to build/reproduce

I've read about a PVC U-pipe idea but decided to add an extra 90deg. elbow to further reduce the likelihood of any direct reflection making it to the light sensor and ended up with this:


Total parts used cost $34.40 before taxes:
- 3 x 4" 90deg. PVC elbows
- 1 x 4" -> 3" step down adapter
- 1 x 3" -> 1.5" stepd down adapter/cap

The entire contraption will be strapped/bolted onto a wood base. The end where I'm shining the light into will have a glass/plastic lens over it that can accomodate lights up to 4" and establish a platform for the light to rest bezel down on and be completely exposed to allow a fan to keep it cool. I'll cut card board/paper templates for smaller lights that will allow perfect centering thus allowing consistent repeatable measurements. The other end w/the step down adapters will need to be sanded down to fit but will hold the light sensor.

Worst case is that if this doesn't work, since no glue or alteration is involved, I can return the 3 x 90deg. elbow which was the majority of the cost for this project. The step down adapters will need to be sanded down and can not be returned but I'm sure I cand find other uses for them.

For now, just as a POC for myself, I skipped the step down adapters and just placed the sensor at the lip of one end. I placed a piece of glass on the light end to hold the light in place. I noticed that I'm allowed some flexibility w/the placement of the light w/out affecting the reading drastically (the sensor however will read a bit higher once centered in the step down adapter).

Here are some lights with the mfg's claimed ANSI values and what I measured (PVC) after 30 seconds:

Icon Link

High 50
PVC - 41

Klarus XT20

High 1200
PVC - 1222 (this light uses PWM even on high so I actually should've done an avg instead of eyeballing a single value)

Niteye EYE30


Turbo 2000 / High 1000
PVC - 2117 / 1100

SureFire M3LT

High 400 / Low 70
PVC - 669 / 139.5

SureFire E2DL

High - 200
PVC - 234

Sunwayman T20C (forgot to take pic)
High - 438
PVC - 290

Sunwayman T40CS

High - 788
PVC - 745

Sunwayman V60C

Max - 728
PVC - 831

Xeno G10v2

High - 460 OTF
PVC - 440

So it seems like it's not too far off and thus far doesn't seem to be favoring throwers. There are of course a few anomalies like the V60C. I know for sure lux was lower than the T40CS thus why I'm surprised why the lumens measured this way was higher.

Of course there's consideration to be given to the semi-glossy surface of the PVC so I may look to coat it w/IS paint. Anyways more experimenting to come but what are your thoughts on this?

I am by no means an expert on this and can use whatever guidance and tips you guys can provide. Also, the above readings were pure lux w/no conversion done.

Cheers,
Tim
turboBB вне форума   Ответить с цитированием Вверх
Поблагодарили: 3 раз(а)
Admin (26.03.2012), Joker12 (26.03.2012), Leon (26.03.2012)
Старый 26.03.2012, 23:06   2
poca77
Флэшанутый светоголик
 
Аватар для poca77
 
Регистрация: 16.02.2012
Последняя активность: 01.03.2016 16:39
Адрес: Москва, Жуковский, Раменское
Сообщений: 876
Записей в дневнике: 1
Сказал(а) спасибо: 225
Поблагодарили: 113 раз(а) в 60 сообщениях

По умолчанию Re: Lumens measuring contraption (feedback please!)

Lightbox, custom. That's how it can be measured, lightbox (spherical) should be better, at least more precise
__________________
Fenix TK35 U2, LD15, E05; Armytek Viking X, Neutron 1A XM-L T4 OP, Sunwayman V11R; Nitecore EC25, Sens AA; Convoy S3 Gold, Ikelite Diver, Kovea PA CCFL, FL33-35С v2 нефрит, Кшиштоф II, Фрэнк:http://forum.fonarevka.ru/s...
Фонарь Судного Дня: http://forum.fonarevka.ru/s...
poca77 вне форума   Ответить с цитированием Вверх
Старый 26.03.2012, 23:11   3
Joker12
Surefire лучший в мире !
 
Аватар для Joker12
 
Регистрация: 25.11.2010
Последняя активность: 02.02.2016 22:13
Адрес: Самара
Сообщений: 977
Записей в дневнике: 11
Сказал(а) спасибо: 82
Поблагодарили: 505 раз(а) в 118 сообщениях

По умолчанию Re: Lumens measuring contraption (feedback please!)

Very original Lightbox.
Joker12 вне форума   Ответить с цитированием Вверх
Старый 26.03.2012, 23:16   4
poca77
Флэшанутый светоголик
 
Аватар для poca77
 
Регистрация: 16.02.2012
Последняя активность: 01.03.2016 16:39
Адрес: Москва, Жуковский, Раменское
Сообщений: 876
Записей в дневнике: 1
Сказал(а) спасибо: 225
Поблагодарили: 113 раз(а) в 60 сообщениях

По умолчанию Re: Lumens measuring contraption (feedback please!)

Цитата:
Посмотреть сообщение Сообщение от Joker12 :
Very original Lightbox.
That is not my idea, but for precise lux measurement spherical is better. More precise.
poca77 вне форума   Ответить с цитированием Вверх
Старый 26.03.2012, 23:22   5
Joker12
Surefire лучший в мире !
 
Аватар для Joker12
 
Регистрация: 25.11.2010
Последняя активность: 02.02.2016 22:13
Адрес: Самара
Сообщений: 977
Записей в дневнике: 11
Сказал(а) спасибо: 82
Поблагодарили: 505 раз(а) в 118 сообщениях

По умолчанию Re: Lumens measuring contraption (feedback please!)

Цитата:
Посмотреть сообщение Сообщение от poca77 :
That is not my idea, but for precise lux measurement spherical is better. More precise.
We measure the reflected light is fine, and this method. Not super accurate, but the price!
Joker12 вне форума   Ответить с цитированием Вверх
Старый 26.03.2012, 23:36   6
poca77
Флэшанутый светоголик
 
Аватар для poca77
 
Регистрация: 16.02.2012
Последняя активность: 01.03.2016 16:39
Адрес: Москва, Жуковский, Раменское
Сообщений: 876
Записей в дневнике: 1
Сказал(а) спасибо: 225
Поблагодарили: 113 раз(а) в 60 сообщениях

По умолчанию Re: Lumens measuring contraption (feedback please!)

Цитата:
Посмотреть сообщение Сообщение от Joker12 :
We measure the reflected light is fine, and this method. Not super accurate, but the price!
Do you mean ceiling bounce?
poca77 вне форума   Ответить с цитированием Вверх
Старый 26.03.2012, 23:41   7
Joker12
Surefire лучший в мире !
 
Аватар для Joker12
 
Регистрация: 25.11.2010
Последняя активность: 02.02.2016 22:13
Адрес: Самара
Сообщений: 977
Записей в дневнике: 11
Сказал(а) спасибо: 82
Поблагодарили: 505 раз(а) в 118 сообщениях

По умолчанию Re: Lumens measuring contraption (feedback please!)

Цитата:
Посмотреть сообщение Сообщение от poca77 :
Do you mean ceiling bounce?
Я имею в виду, дешево и сердито.
Joker12 вне форума   Ответить с цитированием Вверх
Старый 27.03.2012, 01:27   8
poca77
Флэшанутый светоголик
 
Аватар для poca77
 
Регистрация: 16.02.2012
Последняя активность: 01.03.2016 16:39
Адрес: Москва, Жуковский, Раменское
Сообщений: 876
Записей в дневнике: 1
Сказал(а) спасибо: 225
Поблагодарили: 113 раз(а) в 60 сообщениях

По умолчанию Re: Lumens measuring contraption (feedback please!)

7
Цитата:
Посмотреть сообщение Сообщение от Joker12 :
Я имею в виду, дешево и сердито.
Да тоже хочется,
а где мне взять такую тёщу )))
Свет по трубам... А электричество в кранах?

[Исправлено: poca77, 27.03.2012 в 01:38]
poca77 вне форума   Ответить с цитированием Вверх
Ответ  Создать новую тему
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск





Copyright ©2007 - 2024, FONAREVKA.RU

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd. Перевод: zCarot

Правила форума | Отказ от ответственности

Время генерации страницы 0.10044 секунды с 18 запросами