Светодиодные фонари и световые приборы. Всё о светотехнике.
Вернуться   Форум FONAREVKA.RU Обзоры фонарей Flashlight Reviews
Расширенный поиск
Забыли пароль? Регистрация

  • О нашем проекте
  • Светотехника и световые приборы
  • Правила форума
Проект FONAREVKA.RU специализируется на предоставлении всей необходимой информации по светотехнике:

— светодиодные фонари;
— различные источники питания;
— разнообразные зарядные устройства;
— освещение помещений и наружное освещение;
— световые приборы для личного, пассажирского и грузового транспорта;
— специальные световые приборы для медицины, для растений, для аквариумов, для террариумов, а также аварийно-сигнальные световые приборы;
— альтернативные источники света;
— лазеры и лазерная техника.

Если у вас есть вопросы по выбору фонарей, аккумуляторов и зарядных устройств ознакомьтесь с FAQ от наших экспертов:

F.A.Q. по выбору фонарей различных типов;
F.A.Q. по выбору аккумуляторов;
F.A.Q. по выбору зарядных устройств.
Ответ  Создать новую тему
Просмотров в теме 4044   Ответов в теме 0   Подписчиков на тему 1   Добавили в закладки 0
Опции темы Поиск в этой теме
Старый 24.04.2012, 13:59 Автор темы   1
Увлеченный
 
Аватар для candle lamp
 
Регистрация: 01.08.2011
Последняя активность: 09.06.2017 16:17
Адрес: South Korea
Сообщений: 132
Сказал(а) спасибо: 4
Поблагодарили: 401 раз(а) в 86 сообщениях

Wink2 Simplified Spark SL6-740NW (XM-L T5)

Spark has released SL6S which is simplified version of SL6.
SL6S keeps all the main features of SL6, but removed the tailcap switch and inner tube.


I received a SL6S-740NW and it comes with a holster, two extra o-rings, a diffuser and a user manual.
.

The shape of SL6S-740NW is quite same as SL6-740NW except the tailcap.
.

Left is SL6 and Right SL6S.
The inner tube and tailcap switch are removed. The very early SL6 version has an issue with a fat
protected 18650 cells and tailcap switch doesn't work.
There is no such issue on my SL6S.
.

SL6S(right) has no outer spring due to removal of the inner tube & tailcap switch.
.

SL6(left) has a switch, but SL6S has no one. It can tailstand perfectly.
.

SL6(Left) looks nicer than SL6S to me. It seems SL6S has a tailcap switch though.
SL6 has only one small hole for lanyard and SL6S has four.
.

The clip of SL6S(right) looks better than SL6, and has clean surface.
.

I have tested with several batteries on super mode.
- Surefire 2xCR123A
- Unprotected flat-top LG 18650(2600, 2800, 3000mAh)
- Unprotected flat-top Panasonic 18650(3100mAh)
- Protected button-top Jil Lite 18650(2600mAh)
- Protected buttton-top NLTEC 18650(2600mAh)

All batteries work fine on super mode except Jil Lite 18650 cell.
It can't access to the super mode due to the very high discharge ratio. I think its PCM works.
.

From left to right, Nailbender P60 drop-in module 4500K NW, 4000K NW, SL6S-740NW, YEZL Z1X CW.
All is powered by one 18650 cell.
.

The main specs. for each light :
- Nailbender P60 4500K NW : Max. current 2.8A, OP reflector
- Nailbender P60 4000K NW : Max. current 3.0A, OP reflector
- Spark SL6S-740NW : Max. current 3.0A, OP reflector
- YEZL Z1X CW : Max. current 2.5A, SMO reflector
.
The following beamshots condition :
- Distance : about 7m
- Brightness : Max.
- ISO100, F2.8, 1/4sec
- Battery : LG 18650(2600mAh)

.
- ISO100, F2.8, 1/8sec

.
- ISO100, F2.8, 1/4sec

YEZL Z1X CW
.

Spark SL6S-740NW
.

Nailbender P60 4500K NW
.

Nailbender P60 4000K NW
.
- ISO100, F2.8, 1/8sec

YEZL Z1X CW
.

Spark SL6S-740NW
.

Nailbender P60 4500K NW
.

Nailbender P60 4000K NW
.

.

.

.

candle lamp вне форума   Ответить с цитированием Вверх
Ответ  Создать новую тему
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск





Copyright ©2007 - 2024, FONAREVKA.RU

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd. Перевод: zCarot

Правила форума | Отказ от ответственности

Время генерации страницы 0.08551 секунды с 16 запросами