Светодиодные фонари и световые приборы. Всё о светотехнике.
Вернуться   Форум FONAREVKA.RU Обзоры фонарей Flashlight Reviews
Расширенный поиск
Забыли пароль? Регистрация

  • О нашем проекте
  • Светотехника и световые приборы
  • Правила форума
Проект FONAREVKA.RU специализируется на предоставлении всей необходимой информации по светотехнике:

— светодиодные фонари;
— различные источники питания;
— разнообразные зарядные устройства;
— освещение помещений и наружное освещение;
— световые приборы для личного, пассажирского и грузового транспорта;
— специальные световые приборы для медицины, для растений, для аквариумов, для террариумов, а также аварийно-сигнальные световые приборы;
— альтернативные источники света;
— лазеры и лазерная техника.

Если у вас есть вопросы по выбору фонарей, аккумуляторов и зарядных устройств ознакомьтесь с FAQ от наших экспертов:

F.A.Q. по выбору фонарей различных типов;
F.A.Q. по выбору аккумуляторов;
F.A.Q. по выбору зарядных устройств.
Ответ  Создать новую тему
Просмотров в теме 3311   Ответов в теме 0   Подписчиков на тему 0   Добавили в закладки 0
Опции темы Поиск в этой теме
Старый 20.05.2014, 14:15 Автор темы   1
Новичок
 
Аватар для gopajti
 
Регистрация: 04.01.2013
Последняя активность: 29.09.2015 22:48
Сообщений: 47
Сказал(а) спасибо: 1
Поблагодарили: 85 раз(а) в 24 сообщениях

По умолчанию Foursevens Maelstrom MMU-X3 (3*XM-L2, 1600lm) pictures, impressions

Hello guys, one of the smallest triple led flashlight arrived few weeks ago, this is one of my favourite flashlight now, I made some pics, and I would like to share my impressions also


Official,

Features

Strike-Bezel
Current regulation
Thermal regulation
Smart circuit for rechargeable batteries
Reverse-polarity protection


Specifications

Dimensions: Length: 5.6 inches (14.2cm), Body diameter: 1.3 inches (3.3cm) / Head diameter: 1.8 inches (4.6cm), Weight (without batteries): 5.6 oz (158.76g)
Led emitter: (3) CREE XM-L2
Power source: 1*26650
Voltage range: 3V-4.2V
Spot beam: Angle: 12 degrees / Diameter at 3 meters: 620mm
Flood beam: Angle: 90 degrees / Diameter at 1 meter: 2 meters
Britghtness levels: Low: 200 lumens, 11 hrs / High: 1600 lumens, 2.5 hrs
Reflector: Smooth
Body material: Type-III hard-anodized aircraft-grade aluminum
Bezel material: Type-III hard-anodized aluminum strike-bezel
Lens material: Optical-grade glass lens, sapphire coating, antireflective coating
Included accessories: Spare-o-rings, holster (Battery and Battery Charger NOT included)

The Maelstrom MMU-X3 features a simple, two-mode interface that takes only a few seconds to master. To start, please make sure the MMU-X3 battery is inserted with the positive side (+) toward the head. Then, tighten the tailcap fully down and the MMU-X3 will turn on. Loosen the tailcap a half-turn, and the MMU-X3 will turn off.

The MMU-X3 tailcap has a pressure-style switch. When the tailcap is loosened a half-turn, simply press the button on the back to activate the light. The switching mechanism is momentary, which means when you stop pressing on the button, the MMU-X3 will turn off. To 'lock' the MMU-X3 on, simply tighten the tailcap fully down again.

To switch between the high and low output modes, turn the MMU-X3 off, and then turn it on again within 1 second. Any time the MMU-X3 is turned on within 1 second of being turned off, it will automatically switch to the next mode. However, if you leave the MMU-X3 off for 2 seconds or longer, it will "memorize" the last mode used. See the examples below:

Example 1:
ON (High mode) — OFF (1 Second) — ON (Low mode)
Example 2:
ON (High mode) — OFF (2 Seconds) — ON (High mode)


My impressions

Pros


- High build quality, with very nice semi-matte black anodizing. Looking better than earlier Foursevens flashlights! (I have an MMX with burst mode, but MMU-X3 anodizing looks different, looking better)
- Scratch free anodizing
- Very nice design, comfortable in hand
- Well lubricated thread and o-ring
- Dust free reflector, lens
- Awesome output (1600lm) from a relative small flashlight
- NO irritating pwm flickering!
- The battery is not rattle in tube
- Nice beam with lots of spill, similar as Jetbeam DDR30, but without rings
- Simple UI, only two mode, if you need you can change modes with one hand
- MMU-X3 comes with thermal control, not a simple "3-5 mins timer"
- Low output (200lm) is ideal for many situations, I think, that was a good choice
- Good quality "hard" holster

Cons

- no real cons for me

Other comments

- I hope neutral white version will be available in future

my tips


Recommended batteries: Foursevens Protected 26650, 4000mAh, Keeppower Protected 26650 (4500mAh)
Recommended charger(s): Foursevens LifePO4/Li-ion charger (V4) (if you are an EU customer you need EU plug adapter for this charger, or you can use this charger with USB cable/adapter), XTAR SP1/SP2 (faster charge current, max. 2A)



my pictures, more pics coming soon, incl outdoor beamshots































with Fenix LD41 (XM-L2 U2) and Fenix TK35 U2



with Jetbeam DDR30 and Fenix RC40



Jetbeam SRA40, Skilhunt K26 (26650)



Olight S15, S10-L2, S20-L2
















--------------------------



ISO100, F2.8, 2.0s, WB Daylight, distance ~20m

Maelstrom MMU-X3 vs Nitecore P12





Malestrom MMU-X3 vs Microfire M2C



Malestrom MMU-X3 vs Microfire M2C



Malestrom MMU-X3 vs Fenix PD35




ISO100, F2.8, 1.3s

Maelstrom MMU-X3 vs Jetbeam DDR26



Maelstrom MMU-X3 vs Olight M22





Maelstrom MMU-X3 vs Fenix TK76 (spot)



Maelstrom MMU-X3 vs Fenix TK76




ISO100, F2.8, 0.8s

Fenix TK75, TK76
Olight SR96, Fenix RC40
Jetbeam DDR30, Maelstrom MMU-X3



gopajti вне форума   Ответить с цитированием Вверх
Поблагодарили: 3 раз(а)
happy (21.05.2014), Pit Hi-Fi (24.10.2015), WallE (20.05.2014)
Ответ  Создать новую тему
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск





Copyright ©2007 - 2024, FONAREVKA.RU

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd. Перевод: zCarot

Правила форума | Отказ от ответственности

Время генерации страницы 0.11776 секунды с 18 запросами