Светодиодные фонари и световые приборы. Всё о светотехнике.
Вернуться   Форум FONAREVKA.RU Обзоры фонарей Flashlight Reviews
Расширенный поиск
Забыли пароль? Регистрация

  • О нашем проекте
  • Светотехника и световые приборы
  • Правила форума
Проект FONAREVKA.RU специализируется на предоставлении всей необходимой информации по светотехнике:

— светодиодные фонари;
— различные источники питания;
— разнообразные зарядные устройства;
— освещение помещений и наружное освещение;
— световые приборы для личного, пассажирского и грузового транспорта;
— специальные световые приборы для медицины, для растений, для аквариумов, для террариумов, а также аварийно-сигнальные световые приборы;
— альтернативные источники света;
— лазеры и лазерная техника.

Если у вас есть вопросы по выбору фонарей, аккумуляторов и зарядных устройств ознакомьтесь с FAQ от наших экспертов:

F.A.Q. по выбору фонарей различных типов;
F.A.Q. по выбору аккумуляторов;
F.A.Q. по выбору зарядных устройств.
Ответ  Создать новую тему
Просмотров в теме 3235   Ответов в теме 0   Подписчиков на тему 0   Добавили в закладки 0
Опции темы Поиск в этой теме
Старый 24.05.2011, 15:14 Автор темы   1
Новичок
 
Аватар для Zeruel
 
Регистрация: 25.06.2010
Последняя активность: 25.06.2010 21:28
Сообщений: 12
Сказал(а) спасибо: 0
Поблагодарили: 4 раз(а) в 2 сообщениях

По умолчанию Jet-III Pro ST rebirth with P7 + SMO

I have wondered about combining the features of Jetbeam with a modded P7 emitter and had came across a thread by Sabrewolf who modded his some time late last year. So, I requested the same mod on my Jet-III Pro St from him but with a little difference: using SMO.

So far, I have seen most lights with P7 emitters using OP, very few I saw that could answer my curiosity if a SMO can work just as well, P7 being a quad led and all. I also wondered if it will produce a stronger hotspot or if any at all.

After some curbing of excitement and waiting for delivery, here're the results:

Received my Jet in pristine condition



SMO in its full glory. No scratches or nicks visible from the front. I'm not sure if Sabrewolf had trimmed the reflector, if he did, it's a perfect job.



The rear, clean like it's never been touched. (that didn't sound right )



Following are beam shots of Jet-III Pro ST comparing with a Fenix P3D.

Subject is a window blind, about 5m away in darkness



P3D, still a bright and beautiful light.



Jet-III PRO ST with P7. It lit up the entire room, showing a very soft hotspot, artifacts are not as bad as I feared, just a faint faint projection of the quad led and slightly more obvious rings on the edge of the spill.



Quick shot side-by-side. The quad shadow is slightly more visible here. The beams are not suppose to be creamy, guess it's my cam compensation.



The Jet doesn't get hot, at most warm to handle. It also retain all it's features, hi, lo, strobe and IBS Woohoo One thing I have to remind myself is not to look at the business end when strobe is engaged. If i did, I'll probably foamed in my mouth and whisper "Sabrewolf.....you...da....man"
Zeruel вне форума   Ответить с цитированием Вверх
Ответ  Создать новую тему
Опции темы Поиск в этой теме
Поиск в этой теме:

Расширенный поиск





Copyright ©2007 - 2024, FONAREVKA.RU

Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd. Перевод: zCarot

Правила форума | Отказ от ответственности

Время генерации страницы 0.07428 секунды с 16 запросами